Can You Put New Plastics on Old Dirt Bike

Can You Put New Plastics on Old Dirt Bike

Introduction

Have you ever had an old dirt bike sitting in your garage that you don’t know what to do with? Maybe you’ve been thinking of getting a new one, but the cost is just too high. Have you ever thought of turning that old dirt bike into a new one? It may not be as impossible as it sounds. All you need is some new plastic and a little bit of elbow grease. We will give the answer to whether can you put new plastics on old dirt bike. Keep reading to find out how to do it.

Can You Put New Plastics on Old Dirt Bike

Why You Need to Put New Plastics On Your Old Dirt Bike

You’ve been riding your dirt bike for years. It’s taken you through some of the roughest terrains and gotten you out of some of the stickiest situations. But lately, it just doesn’t seem to be performing like it used to. The suspension isn’t as responsive and the engine feels sluggish. You’ve checked all the obvious things, but you can’t seem to figure out what’s wrong.

One possibility is that your plastics are worn out. Over time, UV rays, rock chips, and everyday wear and tear can take their toll on plastic parts. When plastics get old, they become brittle and less flexible. This can cause all sorts of problems, from decreased performance to broken parts.

Luckily, replacing your old plastics is relatively easy and inexpensive. New plastics will not only help your dirt bike look better, but they’ll also restore its performance. So if your dirt bike isn’t riding like it used to, don’t despair – simply give it a new lease on life with some new plastics.

Can You Put New Plastics on Old Dirt Bike

If you’re like most people, you probably have a drawer or cabinet full of old plastics. You may have even thought about using some of these plastics to give your dirt bike a new look. But before you go ahead and start putting new plastics on your old dirt bike, there are a few things you need to take into consideration.

First, it’s important to make sure that the new plastics are compatible with the old ones. You don’t want to end up with a mismatched mess! Second, you’ll need to take into account the size and shape of the new plastics. They should be able to fit snugly onto your dirt bike without interfering with any of the bike’s components.

 It's Important to Make Sure That the New Plastics Are Compatible With the Old Ones

Finally, you’ll need to consider the weight of the new plastics. Heavier plastics may throw off the balance of your dirt bike and make it more difficult to control. So, can you put new plastics on old dirt bike? The answer is yes – but only if you do it carefully!

How to Put New Plastics on Old Dirt Bike

There’s nothing like the feeling of taking your dirt bike out for a spin on a warm, sunny day. But over time, the plastics can start to look faded and worn. If you’re looking to give your bike a fresh new look, don’t despair – it’s actually quite easy to replace the plastics. In fact, you can do it in just eight simple steps.

First, remove the old plastics. This is usually just a matter of taking out a few screws. Next, clean the surface of the bike where the new plastics will be attached. It’s important to get rid of any dirt or debris that could prevent the new plastics from adhering properly.

Clean the Surface of Dirt Bike

Third, apply a generous amount of adhesive to both the bike and the new plastics. Fourth, carefully position the new plastics on the bike, making sure that they’re aligned correctly. Once you’re happy with the positioning, press firmly to make sure that they’re securely attached. Fifth, allow the adhesive to dry completely – this usually takes around 24 hours.

Carefully Position the 
New Plastics on the Bike

Sixth, once the adhesive is dry, you can start reattaching any screws or bolts that were removed earlier. Seventh, apply any decals or graphics that you want to use to customize your new look. And finally, enjoy your newly refreshed dirt bike!

Things Not Do While Putting New Plastics on Your Dirt Bike

There are a few things you need to keep in mind when putting new plastics on your dirt bike. First, make sure that the old plastics are completely clean before applying the new ones. Any dirt or debris on the old plastics will just transfer over to the new plastics, and it will be more difficult to get them to stick.

Second, be careful not to over-tighten the screws when attaching the new plastics. Just snug them up until they’re flush with the surface; if you over-tighten them, you risk stripping the threads or cracking the plastic. Finally, don’t forget to put a layer of clear coat on the new plastics to help protect them from UV damage and scratches. By following these simple tips, you’ll ensure that your new plastics look great and last for years to come.

 Be Careful Not to Over-tighten the Screws When Attaching the New Plastics

How to Restore an Old Dirt Bike

If you’re lucky enough to find an old dirt bike, you may be wondering how to restore it to its former glory. While it may seem like a daunting task, with a little time and elbow grease, you can bring your dirt bike back to life. The first step is to give the bike a thorough cleaning. Be sure to remove all the dirt and grime from the frame, forks, and wheels.

Next, inspect the bike for any damage. If any parts are damaged beyond repair, you’ll need to source replacement parts. Once you’ve replaced any damaged parts, it’s time to tune up the engine. Check the oil level and make sure the air filter is clean. To finish up, inflate the tires and take your bike out for a test ride. With a little bit of work, you can enjoy riding your newly restored dirt bike.

How Do You Make Old Plastic Look New?

If your plastic has started to look dull, there are a few easy ways to make it look new again. First, you can give it a good wash with soap and water. For tougher stains, you can use a mild abrasive cleaner. Just be sure to rinse the cleaner off completely to avoid damaging the plastic. If your plastic is looking cloudy, you can try polishing it with a soft cloth.

For best results, polish in the direction of the grain. If your plastic has scratches, you can try buffing them out with a sequence of finer and finer grit sandpaper. Start with coarse sandpaper and work your way up to very fine sandpaper. Finally, if your plastic has cracks or corrosion, you may need to replace it entirely.

Conclusion

We’ve taken a look at the pros and cons of using new plastics on an old dirt bike. If you decide to replace your old plastics, be sure to do your research so that you get the best possible product for your needs. And as always, if you have any questions or need help finding the right parts for your bike, our team at PartsFinder is here to help. Give us a call or drop by our store today! So, We have explored the answer to whether can you put new plastics on old dirt bike.

You may read also – Are Dirt Bikes Bad for the Environment

Leave a Comment

Your email address will not be published. Required fields are marked *