How to Make a Dirt Bike Stand Out of Wood

How to Make a Dirt Bike Stand Out of Wood


There’s nothing quite like the feeling of blasting down a dirt bike trail, the wind in your hair, and the sun on your face. If you’re like most riders, you love spending as much time on your bike as possible. But what do you do when it’s raining or cold outside?

How to Make a Dirt Bike Stand Out of Wood

One option is to build a dirt bike stand so you can keep riding even when conditions aren’t ideal. In this post, we’ll show you how to make a dirt bike stand out of wood so you can keep enjoying those rides no matter what Mother Nature throws at you.

Tools We Need to Make a Dirt Bike Stand Out of Wood

A dirt bike stand is an essential tool for any motocross enthusiast. Not only does it provide a safe and secure place to store your bike, but it also helps to keep the bike clean and free of dirt and grime. There are a few different things you will need in order to make a dirt bike stand out of wood.

First, you will need a piece of plywood that is at least four feet by eight feet. Next, you will need two-by-fours that are at least eight feet long. Finally, you will need screws, nails, or bolts to hold the plywood and two-by-fours together. With these simple tools, you can easily build a dirt bike stand that will last for years.

How to Make a Dirt Bike Stand Out of Wood

For those who love extreme sports, learning how to make a dirt bike stand out of wood is a great way to show off your skills. By following these six simple steps, you can create a sturdy and stylish bike stand that will make your dirt bike the envy of all your friends.

Step 1

Decide on the dimensions of your dirt bike stand. The length should be equal to the wheelbase of your dirt bike, and the width should be slightly wider than the handlebars.

Step 2

Cut four more pieces of wood to form the sides of the stand. Make sure that these pieces are cut at a 90-degree angle so that they fit snugly together.

Cut Four More Pieces of Wood to Form the Sides of the Stand

Step 3

Drill four holes into each piece of wood – two on each side. These holes should be evenly spaced and large enough to accommodate bolts or screws.

Drill four holes into  each piece of wood

Step 4

Paint or stain your wooden boards to make them more durable and help them withstand the elements. You can also add a decal or other type of embellishment to further personalize your dirt bike stand. Be sure to sand down any rough edges on your boards before you begin painting or staining. If you’re using paint, apply a primer first to help the paint adhere better and prevent it from chipping.

Paint or Stain Your Wooden Boards

Step 5

After applying the paint or stain, now you need to assemble the wooden stand on your dirt bike. You need to make sure that all four corners of your stand are secure. And you should use screws instead of nails. Because screws are more protective than nails.

Step 6

Over time, the top layer of your dirt bike stand will become worn down from the elements and regular use. To help prolong the life of your stand, it’s a good idea to add a top layer of fresh wood. This will not only improve the look of your stand, but it will also provide an extra layer of protection against the elements.

When choosing a new piece of wood, make sure to select one that is durable and weather-resistant. Cedar is a good option, but you can also use pressure-treated lumber. If you’re adding a top layer to an existing stand, be sure to attach it with screws or nails for added stability. With a little bit of care, your dirt bike stand will last for years to come.

By reading all these six steps you will able to know how to make a dirt bike stand out of wood.

Tips & Tricks to Make a Dirt Bike Stand Out of Wood

There are various ways to make a dirt bike stand out of wood. Follow these tips and tricks to make sure your dirt bike stand is both unique and stylish.

  • Firstly, sand the wood down until it is smooth. This will help to create a nice finish and also prevent splinters.
  • Once the wood is sanded, you can then choose to paint or stain it. If you want to keep the natural look of the wood, a clear sealant can be used instead.
  • Once the sealant is dry, drill holes into the wood for the screws that will secure the bike stand to the ground. Make sure that the holes are slightly smaller than the screws so that they fit snugly.
  • Finally, screw the bike stand into place and enjoy! Now you have a sturdy and stylish dirt bike stand that will make your bike look great.

Precautions While Making a Dirt Bike Stand Out of Wood

When modifying a dirt bike, one of the most popular changes is to create a custom stand out of wood. This can give your bike a unique look that will turn heads on the trails. However, there are a few things you need to keep in mind before embarking on this project.

First, it’s important to choose the right type of wood. Hardwoods like oak or maple are ideal, as they’re strong and durable. Avoid using softwoods like pine, as they’re more likely to break or splinter.

Second, you’ll need to take care when cuttings the wood. Make sure all cuts are straight and clean, as any rough edges could cause the stand to collapse.

Finally, once the stand is complete, be sure to test it out before riding your bike. Apply some weight to simulate the weight of your bike, and make sure the stand is stable. Once you’re confident it can support your bike, you’re ready to hit the trails!

What Can I Use Instead of a Dirt Bike Stand?

While dirt bike stands are the ideal way to store your bike, they are not always the most convenient option. If you don’t have a lot of space in your garage or you’re looking for a more portable solution, there are a few other options available. One option is to use a motorcycle dolly. This is a small platform with wheels that you can roll your bike onto.

Once on the dolly, you can easily move your bike around without having to lift it. Another option is to use a wall-mounted bike rack. This type of rack is designed to be mounted on a wall or door, freeing up floor space in your garage. Wall-mounted racks also make it easy to grab your bike and go, since you won’t have to worry about disassembling and reassembling a stand every time you want to ride.

Whatever storage solution you choose, make sure that it is sturdy and can support the weight of your dirt bike. With a little research, you can find the perfect storage solution for your needs.

How Do You Put a Heavy Dirt Bike on the Stand?

Most dirt bikes have a built-in center stand that allows you to easily lift the bike for maintenance or cleaning. However, if your bike does not have a center stand, you will need to use a side stand. To put a heavy dirt bike on the stand, first, lean the bike to one side so that the stand can be extended.

Once the stand is in place, slowly apply pressure to the opposite side of the bike until it lifts off the ground. You may need to ask someone to help you hold the bike steady while you extend the stand. Once the bike is on the stand, make sure that it is securely locked in place before attempting to work on it. Otherwise, you run the risk of tipping the bike over and causing serious injury.


Dirt bike stands can be made out of a variety of materials, but by far the most popular and durable material is wood. Not only is wood strong and sturdy, but it also looks great and gives your dirt bike the custom looks you’ve been wanting. If you have the tools and skills required to make a dirt bike stand out of wood, go for it! You won’t be disappointed with the results.

1 thought on “How to Make a Dirt Bike Stand Out of Wood”

  1. [url=]Private jet Airbus ACJ 319[/url] – more information on our website [url=][/url]
    [url=]Private jet rental[/url] at SkyRevery allows you to use such valuable resource as time most efficiently.
    You are the one who decides where and when your private jet will fly. It is possible to organize and perform a flight between any two civil airports worldwide round the clock. In airports, private jet passengers use special VIP terminals where airport formalities are minimized, and all handling is really fast – you come just 30 minutes before the estimated time of the departure of the rented private jet.
    When you need [url=]private jet charter[/url] now, we can organise your flight with departure in 3 hours from confirmation.

Leave a Comment

Your email address will not be published. Required fields are marked *